Plug the power supply into the voltage socket. If the boundary wire has been laid correctly, the LED light on the charging base will turn on and remain green constantly. See the LED status overview below to ensure that the connection is correct.
- Connect the Charging Station to the power source.
- Plug the power supply into the socket.
- If the boundary wire is correctly installed, the LED light on the charging base will glow green constantly.
- The charging station will blink green while charging.
- If the charging station blinks red, the boundary wire is not mounted correctly or has been damaged.
Check the LED status overview below to ensure that everything is functioning as it should.
LED
- Green light: The boundary wire is correctly installed, and the robot is fully charged.
- No light: There is no power. Check that the power supply is properly connected to the charging station and plugged into a socket.
- Flashing green light: The robotic lawn mower is charging.
- Flashing red light: The boundary wire is not properly connected in the red/black plug, or there is a break somewhere in the boundary wire. Check any cable joints.